

- Size
- 24 x 24 in
- Turnaround
- Standard
- Ready
- Wed, Oct 28 to Fri, Oct 30
A free proof before we print. If we get it wrong, we reprint or refund.
Banners & Large FormatSame day eligible
Print-N-Stick Fabric
Printable fabric with a repositionable adhesive back. Peel it up and re-place it mid-install without wrecking it, and pull it off later with no residue. Class A fire rated, over 95% opaque, and cuttable to any shape. Priced at $9.00 per square foot, $35 minimum.
- Material
- 5 mil bright-white satin polyester (Terylene) fabric, matte finish
- Adhesive
- Removable, repositionable micro-encapsulated adhesiveLifts and re-sticks during install, and removes cleanly with no residue
- Maximum width
- 60 in in a single pieceWider graphics are printed as matched panels and butted on the wall
- Fire rating
- Class A, ASTM E84
- Whiteness opacity
- 110+ CIE whiteness, over 95% opacity. Dark wall colors do not show through
- Durability
- Water resistantRated up to 6 months outdoors without over-lamination
- Cutting
- Contour cut to any shape. Will not fray, rip, wrinkle or stretch
- Best surfaces
- Smooth painted drywall, glass, doors, panels, sealed woodNot for brick, cinder block or heavy texture
- Content
- No PVC, phthalates, glycol ether or formaldehyde
- Turnaround
- Standard 3 to 5 business days2-day +25%, next-day +50%, same-day by 12pm +75%
This is the material to use when the graphic has to come back off. It is a bright-white satin fabric, not vinyl, with a repositionable adhesive on the back. So it goes up without bubbles, lifts and re-places if you get it crooked, and pulls off later without taking the paint with it.
Where it works
Wall murals and cut-out wall graphics. Offices, gyms, showrooms, schools.
Retail and point-of-purchase. Seasonal graphics that change out and get thrown away, not scraped off.
Windows, doors and panels. Over 95% opaque, so a dark wall or a busy background will not ghost through.
Rentals and leased space. It comes off cleanly when you hand the keys back.
Bigger than 60 inches
The fabric runs 60 in wide, so that is the widest single piece. Anything wider we split into matched panels and print them as a set, color-matched in one run. You butt the panels edge to edge on the wall. On a fabric this thin the seam sits nearly flat and reads as a fine line rather than a lip. There is no practical size limit; a 20 ft wall is just four panels.
Installing it
Peel about four inches of the liner off the top, line the graphic up and press it down, then keep peeling the liner back a few inches at a time as you work down. If it goes on crooked, lift it and start again. That is the whole point of this material. The surface needs to be smooth and clean: painted drywall, glass, sealed wood and finished panels are all fine. Brick, cinder block and heavy orange-peel texture are not.
Also in Banners & Large Format



